SẢN PHẨM
- ỐNG VÀ PHỤ KIỆN NHỰA UPVC
- ỐNG VÀ PHỤ KIỆN NHỰA CPVC
- BUILDING HOT&COLD WATER PIPE - ỐNG VÀ PHỤ KIỆN PPR - HÃNG ERA
- ỐNG VÀ PHỤ KIỆN NHỰA HDPE DIN 8974 - HÃNG ERA
- VAN NHỰA MỞ TAY CHỊU HÓA CHẤT - XỬ LÝ NƯỚC (UPVC, CPVC, PPH, PVDF)
- VAN NHỰA ĐIỀU KHIỂN CHỊU HÓA CHẤT - XỬ LÝ NƯỚC - UPVC, CPVCP, PPH, PVDF
- LƯU LƯỢNG KẾ - CẢM BIẾN ĐO LƯỜNG KIỂM SOÁT CHẤT LỎNG, CHẤT KHÍ
- MÁY HÀN ỐNG NHỰA - DAO CẮT ỐNG NHỰA VÀ CÁC CÔNG CỤ THI CÔNG CỤ THI CÔNG ĐƯỜNG ỐNG
- KEO DÁN - PRIMER CHO ỐNG NHỰA UPVC, CPVC, ABS, ACRYLIC - WELD-ON & WELD-ALL (USA)
- VAN THÉP, VAN INOX (SS304, SS316), VAN VI SINH, ACTUATOR - HÃNG KST
- NHỰA TẤM - NHỰA THANH - QUE HÀN NHỰA
- ỐNG PVC NỐI ROĂNG & PHỤ KIỆN
- Phụ kiện PVC cho thoát nước thải và thông hơi - DWV
HỖ TRỢ TRỰC TUYẾN
Côn thu đồng tâm HDPE hàn đối đầu, loại ngắn
Mã sản phẩm:
Reducer concentric
-short spigot
-Butt-welding
-injection moulded
-PE 100-RC black
-short spigot
-Butt-welding
-injection moulded
-PE 100-RC black
Chi tiết sản phẩm
| Dimension | Code | Detail | Unit | Weight |
| 75/63 | 70.009.7563.17 | 75/63 SDR17 ISO S-8 | piece | 0.056 |
| 90/63 | 70.009.9063.17 | 90/63 SDR17 ISO S-8 | piece | 0.087 |
| 90/75 | 70.009.9075.17 | 90/75 SDR17 ISO S-8 | piece | 0.092 |
| 110/63 | 70.009.1163.17 | 110/63 SDR17 ISO S-8 | piece | 0.154 |
| 110/75 | 70.009.1175.17 | 110/75 SDR17 ISO S-8 | piece | 0.15 |
| 110/90 | 70.009.1190.17 | 110/90 SDR17 ISO S-8 | piece | 0.172 |
| 125/63 | 70.009.1263.17 | 125/63 SDR17 ISO S-8 | piece | 0.24 |
| 125/75 | 70.009.1275.17 | 125/75 SDR17 ISO S-8 | piece | 0.236 |
| 125/90 | 70.009.1290.17 | 125/90 SDR17 ISO S-8 | piece | 0.21 |
| 125/110 | 70.009.1211.17 | 125/110 SDR17 ISO S-8 | piece | 0.25 |
| 140/75 | 70.009.1475.17 | 140/75 SDR17 ISO S-8 | piece | 0.36 |
| 140/90 | 70.009.1490.17 | 140/90 SDR17 ISO S-8 | piece | 0.36 |
| 140/110 | 70.009.1411.17 | 140/110 SDR17 ISO S-8 | piece | 0.31 |
| 140/125 | 70.009.1412.17 | 140/125 SDR17 ISO S-8 | piece | 0.305 |
| 160/90 | 70.009.1690.17 | 160/90 SDR17 ISO S-8 | piece | 0.35 |
| 160/110 | 70.009.1611.17 | 160/110 SDR17 ISO S-8 | piece | 0.39 |
| 160/125 | 70.009.1612.17 | 160/125 SDR17 ISO S-8 | piece | 0.468 |
| 160/140 | 70.009.1614.17 | 160/140 SDR17 ISO S-8 | piece | 0.494 |
| 180/90 | 70.009.1890.17 | 180/90 SDR17 ISO S-8 | piece | 0.8 |
| 180/110 | 70.009.1811.17 | 180/110 SDR17 ISO S-8 | piece | 0.82 |
| 180/125 | 70.009.1812.17 | 180/125 SDR17 ISO S-8 | piece | 0.575 |
| 180/140 | 70.009.1814.17 | 180/140 SDR17 ISO S-8 | piece | 0.835 |
| 180/160 | 70.009.1816.17 | 180/160 SDR17 ISO S-8 | piece | 0.66 |
| 200/140 | 70.009.2014.17 | 200/140 SDR17 ISO S-8 | piece | 0.829 |
| 200/160 | 70.009.2016.17 | 200/160 SDR17 ISO S-8 | piece | 0.854 |
| 200/180 | 70.009.2018.17 | 200/180 SDR17 ISO S-8 | piece | 0.951 |
| 225/140 | 70.009.2214.17 | 225/140 SDR17 ISO S-8 | piece | 1.202 |
| 225/160 | 70.009.2216.17 | 225/160 SDR17 ISO S-8 | piece | 1.04 |
| 225/180 | 70.009.2218.17 | 225/180 SDR17 ISO S-8 | piece | 1.32 |
| 225/200 | 70.009.2220.17 | 225/200 SDR17 ISO S-8 | piece | 1.422 |
| 250/160 | 70.009.2516.17 | 250/160 SDR17 ISO S-8 | piece | 1.4 |
| 250/180 | 70.009.2518.17 | 250/180 SDR17 ISO S-8 | piece | 1.67 |
| 250/200 | 70.009.2521.17 | 250/200 SDR17 ISO S-8 | piece | 1.48 |
| 250/225 | 70.009.2522.17 | 250/225 SDR17 ISO S-8 | piece | 1.6 |
| 280/200 | 70.009.2820.17 | 280/200 SDR17 ISO S-8 | piece | 2.72 |
| 280/225 | 70.009.2822.17 | 280/225 SDR17 ISO S-8 | piece | 2.7 |
| 280/250 | 70.009.2825.17 | 280/250 SDR17 ISO S-8 | piece | 2.15 |
| 315/200 | 70.009.3120.17 | 315/200 SDR17 ISO S-8 | piece | 2.994 |
| 315/225 | 70.009.3122.17 | 315/225 SDR17 ISO S-8 | piece | 3.2 |
| 315/250 | 70.009.3125.17 | 315/250 SDR17 ISO S-8 | piece | 2.98 |
| 315/280 | 70.009.3128.17 | 315/280 SDR17 ISO S-8 | piece | 3.8 |
| 25/20 | 70.009.2520.11 | 25/20 SDR11 ISO S-5 | piece | 0.007 |
| 32/20 | 70.009.3220.11 | 32/20 SDR11 ISO S-5 | piece | 0.009 |
| 32/25 | 70.009.3225.11 | 32/25 SDR11 ISO S-5 | piece | 0.01 |
| 40/20 | 70.009.4020.11 | 40/20 SDR11 ISO S-5 | piece | 0.013 |
| 40/25 | 70.009.4025.11 | 40/25 SDR11 ISO S-5 | piece | 0.015 |
| 40/32 | 70.009.4032.11 | 40/32 SDR11 ISO S-5 | piece | 0.016 |
| 50/25 | 70.009.5025.11 | 50/25 SDR11 ISO S-5 | piece | 0.023 |
| 50/32 | 70.009.5032.11 | 50/32 SDR11 ISO S-5 | piece | 0.022 |
| 50/40 | 70.009.5040.11 | 50/40 SDR11 ISO S-5 | piece | 0.028 |
| 63/32 | 70.009.6332.11 | 63/32 SDR11 ISO S-5 | piece | 0.04 |
| 63/40 | 70.009.6340.11 | 63/40 SDR11 ISO S-5 | piece | 0.045 |
| 63/50 | 70.009.6350.11 | 63/50 SDR11 ISO S-5 | piece | 0.053 |
| 75/32 | 70.009.7532.11 | 75/32 SDR11 ISO S-5 | piece | 0.071 |
| 75/40 | 70.009.7540.11 | 75/40 SDR11 ISO S-5 | piece | 0.08 |
| 75/50 | 70.009.7550.11 | 75/50 SDR11 ISO S-5 | piece | 0.077 |
| 75/63 | 70.009.7563.11 | 75/63 SDR11 ISO S-5 | piece | 0.077 |
| 90/50 | 70.009.9050.11 | 90/50 SDR11 ISO S-5 | piece | 0.116 |
| 90/63 | 70.009.9063.11 | 90/63 SDR11 ISO S-5 | piece | 0.113 |
| 90/75 | 70.009.9075.11 | 90/75 SDR11 ISO S-5 | piece | 0.128 |
| 110/50 | 70.009.1150.11 | 110/50 SDR11 ISO S-5 | piece | 0.225 |
| 110/63 | 70.009.1163.11 | 110/63 SDR11 ISO S-5 | piece | 0.2 |
| 110/75 | 70.009.1175.11 | 110/75 SDR11 ISO S-5 | piece | 0.215 |
| 110/90 | 70.009.1190.11 | 110/90 SDR11 ISO S-5 | piece | 0.22 |
| 125/63 | 70.009.1263.11 | 125/63 SDR11 ISO S-5 | piece | 0.293 |
| 125/75 | 70.009.1275.11 | 125/75 SDR11 ISO S-5 | piece | 0.32 |
| 125/90 | 70.009.1290.11 | 125/90 SDR11 ISO S-5 | piece | 0.304 |
| 125/110 | 70.009.1211.11 | 125/110 SDR11 ISO S-5 | piece | 0.329 |
| 140/75 | 70.009.1475.11 | 140/75 SDR11 ISO S-5 | piece | 0.459 |
| 140/90 | 70.009.1490.11 | 140/90 SDR11 ISO S-5 | piece | 0.47 |
| 140/110 | 70.009.1411.11 | 140/110 SDR11 ISO S-5 | piece | 0.44 |
| 140/125 | 70.009.1412.11 | 140/125 SDR11 ISO S-5 | piece | 0.445 |
| 160/90 | 70.009.1690.11 | 160/90 SDR11 ISO S-5 | piece | 0.52 |
| 160/110 | 70.009.1611.11 | 160/110 SDR11 ISO S-5 | piece | 0.639 |
| 160/125 | 70.009.1612.11 | 160/125 SDR11 ISO S-5 | piece | 0.686 |
| 160/140 | 70.009.1614.11 | 160/140 SDR11 ISO S-5 | piece | 0.66 |
| 180/90 | 70.009.1890.11 | 180/90 SDR11 ISO S-5 | piece | 0.98 |
| 180/110 | 70.009.1811.11 | 180/110 SDR11 ISO S-5 | piece | 1.12 |
| 180/125 | 70.009.1812.11 | 180/125 SDR11 ISO S-5 | piece | 0.82 |
| 180/140 | 70.009.1814.11 | 180/140 SDR11 ISO S-5 | piece | 1.03 |
| 180/160 | 70.009.1816.11 | 180/160 SDR11 ISO S-5 | piece | 0.96 |
| 200/140 | 70.009.2014.11 | 200/140 SDR11 ISO S-5 | piece | 1.174 |
| 200/160 | 70.009.2016.11 | 200/160 SDR11 ISO S-5 | piece | 1.24 |
| 200/180 | 70.009.2018.11 | 200/180 SDR11 ISO S-5 | piece | 1.361 |
| 225/140 | 70.009.2214.11 | 225/140 SDR11 ISO S-5 | piece | 1.71 |
| 225/160 | 70.009.2216.11 | 225/160 SDR11 ISO S-5 | piece | 1.59 |
| 225/180 | 70.009.2218.11 | 225/180 SDR11 ISO S-5 | piece | 2.03 |
| 225/200 | 70.009.2220.11 | 225/200 SDR11 ISO S-5 | piece | 2.013 |
| 250/160 | 70.009.2516.11 | 250/160 SDR11 ISO S-5 | piece | 2 |
| 250/180 | 70.009.2518.11 | 250/180 SDR11 ISO S-5 | piece | 2.42 |
| 250/200 | 70.009.2521.11 | 250/200 SDR11 ISO S-5 | piece | 2.12 |
| 250/225 | 70.009.2522.11 | 250/225 SDR11 ISO S-5 | piece | 2.26 |
| 280/200 | 70.009.2820.11 | 280/200 SDR11 ISO S-5 | piece | 3.74 |
| 280/225 | 70.009.2822.11 | 280/225 SDR11 ISO S-5 | piece | 3.8 |
| 280/250 | 70.009.2825.11 | 280/250 SDR11 ISO S-5 | piece | 3.2 |
| 315/200 | 70.009.3120.11 | 315/200 SDR11 ISO S-5 | piece | 4.2 |
| 315/225 | 70.009.3122.11 | 315/225 SDR11 ISO S-5 | piece | 4.56 |
| 315/250 | 70.009.3125.11 | 315/250 SDR11 ISO S-5 | piece | 4.34 |
| 315/280 | 70.009.3128.11 | 315/280 SDR11 ISO S-5 | piece | 4.56 |
